Shower Timer Frequently Asked Questions

How long does the battery last?

That depends on usage and family size. A typical range is 4 to 6 months, perhaps longer for more limited usage. As a part of normal maintenance, we recommend changing the battery every 3 months.

How do you know when the battery needs to be changed?

The unit will not go from full flow to restricted flow or won't open to full flow. In essence, the unit will seem to malfunction.

Where should I place the magnetic sensor to make changes to showering times?

On the face of the unit there is a ring of bubbles on the outer ring. Find the spot where a bubble is missing. On the side of the unit next to the missing bubble is a "line" raised in the covering. Place the sensor over this "line."

How much does the Shower Manager restrict the water flow?

In restricted flow, the Shower Manager will restrict water flow by 2/3 of full flow.

I have an older shower head that delivers over 4 gal / minute. Will the Shower Manager restrict that flow?

Yes, most likely. In keeping with government guidelines of 2.5 gal / minute, the Shower Manager will most likely cut the full flow to the mid-2 gal / minute range.

Does the Shower Manager come with a showerhead?

The Shower Manager does not come with a showerhead. Your existing showerhead should work fine.

Can I use a shower message shower head with your unit?

Yes, but don't forget, the restricted flow will deliver very little water.

Can I change the 5-minute reset internal?

No, this time frame is locked in at the factory.

What is the typical operating range (psi) for the Shower Manager?

In the lab the unit operates between 25 and 80 psi. The water pressure for most water districts is 45 to 65 psi.

Can using other water devices in the house? (flushing the toilet, turning on the clothes washer) impact the operating on the Shower Manager?

In most instances "no" other than the drop in water pressure as these other devices are turned on.

Will the Shower Manager work with low water pressure?

If you are on water well and have a storage tank you should check the operating pressure range. If the setting is 20 to 40 psi, you might want to see if you can adjust this range to 30 to 50 psi. In the lab, the unit functions at 25 psi, but if someone else in the household turns on another water device while showering (flushing a toilet, turning on clothes washer), this additional drop in water pressure may cause the unit to go into restricted flow.

Can I use any type of showerhead with the Shower Manager?

Yes, but there are a few exceptions. Any type of showerhead that shuts off the water flow at the showerhead may interfere with the operation of the Shower Manager.

What is the Warranty period?

There is a 60-day unconditional warranty. If for whatever reason you are not satisfied with the unit, please return it within 60 days of purchase and you will be refund your initial cost.

Can I install the unit myself?

Yes, it installs easily in less than 5-minutes. The only exception is if you cannot remove your existing showerhead, you may need to seek assistance. If you have questions, here is a good website to visit: http://www.essortment.com/home/diyhowshowerh_shfi.htm

What type of threads do you use?

The threads are 1/2" IPS threads, which is a universal thread for showerheads.

Does the Shower Manager shut off the water flow completely?

No, but in restricted mode the water flow is cut to 1/3 of full flow. Nor does is alter the mixture of hot / cold water. Note: plumbing professionals strongly mandated that the on / off value and hot / cold mixture of water should remain with your existing main shower control valve.